Bambu Lab
Bambu Bus Cable - 6pin (AMS to AMS/Hub/Buffer)
Bambu Bus Cable - 6pin (AMS to AMS/Hub/Buffer)
PLX-17-0288-0001📦 Final shipping cost may increase if your cart contains products from multiple vendors (e.g., 2 vendors = 2 shipping charges).
SKU: PLX-17-0288-0001
Couldn't load pickup availability
Caution
Minimum batches of the stickers on the AMS 4-PIN bus cable were misaligned. If you receive the wrong version, please refer to the diagram below for replacement instructions.
Correct: The sticker and the buckle are on opposite sides.
Incorrect: The sticker and the buckle are on the same side.
Solutions
Ignore the content of the sticker and always refer to the direction of the buckle as the standard.
Notice
After maintaining the printer, if you have removed the metal rear cover, it is essential to reinstall the metal rear cover before inserting the AMS 4-pin cable to prevent hardware damage due to reverse insertion. The buckle holes on the rear cover are designed to prevent misalignment and protect against reverse insertion.
Compatibility
For AMS, X1 Series and P1 Series
Product Specifications
| Type | Application | Material | Packaging Size | Packaging Weight |
| 6pin 510mm | 1. Connecting AMS to another AMS which is located at a shorter distance 2. Connecting AMS to Hub or Buffer |
PVC, Metal | 230*155*4 mm | 30 g |
| 6pin 1500mm | 1. Connecting AMS to another AMS which is located at a greater distance 2. Connecting AMS to Hub or Buffer (capable but not recommended) |
PVC, Metal | 230*155*4 mm | 70 g |
| 4pin 260mm | Connecting printer to Hub or Buffer | PVC, Metal | 200*145*4 mm | 10 g |
