PLEX Robotics
HSR-1425CR Servo
HSR-1425CR Servo
31425CRPreț obișnuit
176,00 lei
Preț obișnuit
Preț redus
176,00 lei
Preț unitar
pe
Prețul include taxe.
SKU: 31425CR
Nu am putut încărca disponibilitatea pentru ridicare
The HSR-1425CR is the continuous rotation version of the HS-425BB. The speed is proportional meaning that the further the PWM signal deviates from the idle signal (approximately 1500usec) the faster the servo will rotate. If you're looking for the smoothest continuous rotation servo, be sure to check out the HSR-2645CRH or HSR-2648CR 25 tooth spline servo.
Tech Tips
Specs
| Output Shaft Style | C24T Spline |
|---|---|
| Voltage Range | 4.8V - 6.0V |
| No-Load Speed (4.8V) | 44 rpm |
| No-Load Speed (6.0V) | 52 rpm |
| Stall Torque (4.8V) | 38.8 oz-in (2.8 kg-cm) |
| Stall Torque (6.0V) | 42 oz-in (3.1 kg-cm) |
| Pulse Amplitude | 3-5V |
| Operating Temperature | -20°C to +60°C |
| Current Drain - idle (4.8V) | 3mA |
| Current Drain - idle (6.0V) | 3mA |
| Continuous Rotation Modifiable | Completed (stock) |
| Direction w/ Increasing PWM Signal | Clockwise |
| Motor Type | Brushed |
| Feedback Style | This servo does not have position feedback |
| Output Shaft Support | Dual Ball Bearing MR106 |
| Gear Material | Nylon |
| Wire Length | 7" (178mm) |
| Weight | 1.47oz (41.7g) |
| Wire Gauge | 25AWG |
| Servo Size | Standard |
| Max PWM Signal Range | 1200-1800µsec |
