{"product_id":"servo-commander-1","title":"Servo Commander","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cp\u003eRule the rotation of your servo with the Servo Commander! Its input knob provides real-time servo control while four buttons store configurable travel positions. You can even use the buttons to select your preferred PWM range among four preset options during power-up!\u003c\/p\u003e\n\u003ch2\u003eServo Connection\u003c\/h2\u003e\n\u003cp\u003eTwo sets of 2.54mm (0.1”) headers allow you to put up to two servos under the Servo Commander’s control.\u003c\/p\u003e\n\u003ch2\u003eVoltage Input\u003c\/h2\u003e\n\u003cp\u003eThe Commander can be powered by a DC input voltage between 5 and 15V. The XT30 connector is the primary power input port; however, if you are using a battery with a connector similar to that of a servo (TJC8), you may plug it into the + and - pins at the top of the board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e⚠️VOLTAGE WARNING:\u003c\/strong\u003e\u003cspan\u003eThe voltage you power the Servo Commander with will be passed on to the servo. \u003cstrong\u003eDO NOT use a voltage that is higher than your servo is rated for.\u003c\/strong\u003e Sending a voltage higher than that for which your servo is rated will result in damage to the servo.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eServo Position Programming\u003c\/h2\u003e\n\u003cp\u003eStoring and recalling a servo travel position couldn’t be easier! It’s just like saving radio stations on a car’s stereo. When your servo is in the position you want to save, just hold your button of choice until its corresponding LED illumination is solid. The next time that button is pressed, the servo will travel right back to the saved position!\u003c\/p\u003e\n\u003ch2\u003ePWM Range Customization\u003c\/h2\u003e\n\u003cp\u003eEach of the Servo Commander’s 4 preset PWM ranges has been specially selected by the goBILDA® R\u0026amp;D team to provide you the best options for a variety of servos!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1050µs - 1950µs: The standard for 90° rotation.\u003c\/li\u003e\n\u003cli\u003e850µs-2150µs: The typical max signal range for Hitec and Savox digital servos.\u003c\/li\u003e\n\u003cli\u003e600µs-2400µs: Allows most analog servos to rotate 180°.\u003c\/li\u003e\n\u003cli\u003e500µs-2500µs: Enables goBILDA® servos to achieve full travel!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt’s extremely easy to configure between preset ranges! No computer required. Just follow these steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePower off Servo Commander.\u003c\/li\u003e\n\u003cli\u003eHold button of desired PWM range.\u003c\/li\u003e\n\u003cli\u003ePower on Servo Commander while holding button.\u003c\/li\u003e\n\u003cli\u003eRelease button when the corresponding LED illumination is solid.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAnd if you'd like to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ereverse the output\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eof the Servo Commander, here's what you need to do:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eHold two buttons while powering on the Servo Commander.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThat's it! It's that clean and simple to reverse the output direction. Naturally, you can power off the Servo Commander and repeat the process to return the output direction to its regular setting. A top-to-bottom or bottom-to-top sequence of LED flashes will accompany any successful direction change (signifying whether or not the PWM signal increases or decreases according to clockwise knob rotation, respectively).\u003c\/p\u003e\n\u003ch2\u003eMounting\u003c\/h2\u003e\n\u003cp\u003eThe Servo Commander has four hex-counterbored thru-holes on the goBILDA® 32mm square pattern that provide for easy, versatile attachment to your project. The hex counterbores are ultra-convenient for their ability to hold hex nuts, allowing you to fasten the Servo Commander from the top or bottom with M4 hardware exactly the way you want!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-downloads\"\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul class=\"product-downloadsList\"\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-zip\" title=\"3109-0004-0002.zip\" href=\"https:\/\/www.gobilda.com\/content\/step_files\/3109-0004-0002.zip\" target=\"_blank\"\u003eSTEP File\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-pdf\" title=\"servo_commander_startup_guide.v2.0.min.pdf\" href=\"https:\/\/www.gobilda.com\/content\/user_manuals\/servo_commander_startup_guide.v2.0.min.pdf\" target=\"_blank\"\u003eStartup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-specs\"\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable class=\"product-specsTable\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e20g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eInput Voltage Range (Limit)\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e5 - 15VDC\u003cbr\u003e\u003cspan\u003eDo not supply a higher input voltage than that for which your servo is rated.\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"goBILDA","offers":[{"title":"Default Title","offer_id":58558436835676,"sku":"3109-0004-0002","price":169.0,"currency_code":"RON","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0772\/4394\/1212\/files\/11ProductPhotos_5_29f685fa-f6c1-4167-8a93-05d07832149f.png?v=1786010801","url":"https:\/\/plexrobotics.com\/en\/products\/servo-commander-1","provider":"PLEX Robotics","version":"1.0","type":"link"}