{"product_id":"roboclaw-2x60a-motor-controller","title":"RoboClaw 2x60A Motor Controller","description":"\u003cdiv class=\"product-description\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Roboclaw 2x60A motor controller by Ion Motion Control can supply two brushed DC motors with 60 Amps continuous and up to 120 Amps peak. With its multi mode interface it can be controlled from USB, RC radio, serial devices, analog and or microcontrollers such as an Arduino or Raspberry Pi. Dual quadrature encoders with up to 19.6 million pulses per second are supported. In addition, a wide range of sensor inputs including potentiometers and absolute encoders are supported. Roboclaw's close loop functionality creates absolute control over speed, velocity and direction regardless of loading changes. At the heart of Roboclaw is a high performance motion control intelligence which achieves a higher precision of control while providing better motor performance in open or closed loop modes. With Roboclaw's synchronous regenerative capabilities it will charge a supply battery during slow down or breaking action. With it's advanced circuitry it can also change direction during full throttle without damage! Roboclaw also incorporates a lithium cutoff mode protecting batteries from damage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"product-techTips\"\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003ctable class=\"product-specsTable\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eBridge Channels\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003e3.3V Safe Outputs\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003e5V Tolerant Inputs\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eEncoder Auto Tune\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eThermal Protection\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eCurrent Sense\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eUser Selectable Peak Current\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eBattery Protection\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eRegenerative Braking\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eOver Voltage Protection\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eUnder Voltage Protection\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eSelf Diagnostics\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003ePosition Control Mode\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eVelocity Control Mode\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth class=\"product-specsTable-headerCell\" scope=\"row\"\u003eControl Methods\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eUSB, Analog, RS232, or RC Style PWM Signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003eTech Tips:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eMotion Studio Settings:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Motion-Studio-General-Settings_b_42.html\" target=\"_blank\"\u003eGeneral Settings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Motion-Studio-PWM-Settings_b_45.html\" target=\"_blank\"\u003ePWM Settings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Motion-Studio-Velocity-Settings_b_46.html\" target=\"_blank\"\u003eVelocity Settings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Motion-Studio-Position-Settings_b_48.html\" target=\"_blank\"\u003ePosition Settings\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eArduino:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Using-the-RoboClaw-Arduino-Library_b_34.html\" target=\"_blank\"\u003eUsing the RoboClaw Arduino Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Using-Encoders-with-the-Arduino-Library_b_37.html\" target=\"_blank\"\u003eUsing Encoders with the Arduino Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Standard-Serial-Mode-with-Arduino_b_28.html\" target=\"_blank\"\u003eStandard Serial Mode with Arduino\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Standard-Serial-Bus-Operation-with-Arduino_b_26.html\" target=\"_blank\"\u003eStandard Serial Bus Operation with Arduino\u003cbr\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003cstrong\u003eRaspberry Pi:\u003c\/strong\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Using-Encoders-with-the-Python-Library_b_36.html\" target=\"_blank\"\u003eUsing Encoders with the Python Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Configuring-the-Raspberry-Pi-3-Serial-Port_b_29.html\" target=\"_blank\"\u003eConfiguring the Raspberry Pi 3 Serial Port\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Packet-Serial-with-the-Raspberry-Pi-3_b_30.html\" target=\"_blank\"\u003ePacket Serial with the Raspberry Pi 3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Standard-Serial-with-the-Raspberry-Pi-3_b_31.html\"\u003eStandard Serial with the Raspberry Pi 3\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Standard-Serial-Bus-with-the-Raspberry-Pi-3_b_32.html\" target=\"_blank\"\u003eStandard Serial Bus with the Raspberry Pi 3\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.basicmicro.com\/Packet-Serial-Bus-Operation-with-the-Raspberry-Pi-3_b_33.html\" target=\"_blank\"\u003ePacket Serial Bus Operation with the Raspberry Pi 3\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-downloads\"\u003e\n\u003ch3\u003eDownloads\u003c\/h3\u003e\n\u003cul class=\"product-downloadsList\"\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-pdf\" title=\"roboclaw_datasheet_2x60A.pdf\" href=\"https:\/\/downloads.basicmicro.com\/docs\/roboclaw_datasheet_2x60A.pdf\" target=\"_blank\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-pdf\" title=\"roboclaw_user_manual.pdf\" href=\"https:\/\/downloads.basicmicro.com\/docs\/roboclaw_user_manual.pdf\" target=\"_blank\"\u003eUser Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-general\" title=\"setup.exe\" href=\"https:\/\/downloads.basicmicro.com\/software\/BMStudio\/setup.exe\" target=\"_blank\"\u003eBasic Micro Motion Studio\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-zip\" title=\"roboclaw_python.zip\" href=\"https:\/\/downloads.basicmicro.com\/code\/roboclaw_python.zip\" target=\"_blank\"\u003ePython for Raspberry Pi, OSX, Linux, Windows\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-zip\" title=\"arduino.zip\" href=\"https:\/\/downloads.basicmicro.com\/code\/arduino.zip\" target=\"_blank\"\u003eRoboclaw C# Class Library Source Code\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-zip\" title=\"USBRoboclawVirtualComport.zip\" href=\"https:\/\/downloads.basicmicro.com\/code\/USBRoboclawVirtualComport.zip\" target=\"_blank\"\u003eUSB Roboclaw Windows Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-zip\" title=\"arduino.zip\" href=\"https:\/\/downloads.basicmicro.com\/code\/arduino.zip\" target=\"_blank\"\u003eArduino Library and Examples\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-external\" title=\"roboclaw_ros\" href=\"https:\/\/github.com\/sonyccd\/roboclaw_ros\" target=\"_blank\"\u003eRobot Operating System Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003cli class=\"product-downloadsList-listItem\"\u003e\u003ca class=\"product-downloadsList-listItem-link ext-zip\" title=\"Roboclaw_LabViewInstrDriver.zip\" href=\"https:\/\/downloads.basicmicro.com\/code\/Roboclaw_LabViewInstrDriver.zip\" target=\"_blank\"\u003eLab View Driver\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-specs\"\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003ctable class=\"product-specsTable\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e292g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eMotor Channels\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eMax Continuous Current per Channel\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e60A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eMax Peak Current per Channel\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e120A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eBridged Channels Peak Current\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e240A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eBridged Channels Continuous Current\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e120A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eMax Voltage\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e34VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eBEC\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003e5VDC @ 3Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eMotor Compatibility\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eBrushed DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eEncoder Compatibility\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eRelative and Absolute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"product-specsTable-row\"\u003e\n\u003cth scope=\"row\" class=\"product-specsTable-headerCell\"\u003eMotor Direction\u003c\/th\u003e\n\u003ctd class=\"product-specsTable-cell\"\u003eBidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"goBILDA","offers":[{"title":"Default Title","offer_id":58558305370460,"sku":"IMC414","price":1290.0,"currency_code":"RON","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0772\/4394\/1212\/files\/11ProductPhotos_2_ba90ef7f-c024-44f6-b9a2-1b3ebaea9d99.png?v=1786009568","url":"https:\/\/plexrobotics.com\/en\/products\/roboclaw-2x60a-motor-controller","provider":"PLEX Robotics","version":"1.0","type":"link"}